JTE ½Ã¸®Áî
JTE
½Ã¸®Áî
Ư¡Feature
:
¨ç
Totally meet various requirements for lead free processing.
¨è
Standard 8 couples of up and down zones with patented air management
system to make hot air convection more efficient and faster thermal
compensation.
¨é
PLC+PID closed loop control to achieve high precise temperature control
and repeatable profiles.
¨ê
Dual temperature sensors and dual safety control system shall cut off the
power while abnormal case occurred.
¨ë
The various alarm function: Over temperature alarm, abnormal speed alarm
and Board dropped alarm.
Parameters:
Model |
JTE-800 |
Dimension |
5310X1353X1490 |
No. of Heating Zone |
Top/Bottom 8 |
Length of heating zone |
3121mm |
No. of cooling zone |
ß¾2 |
Air exhaust requirement |
10m©ø/minx2 |
Warming time |
About.30 minute |
Temperature control accuracy |
¡¾1.0¡É |
Temperature deviation on PCB |
¡¾1.5¡É |
PCB Max. width |
400mm |
Component Height |
PCB Top/Bottom25mm |
Conveyor direction |
L¡æR (Option:R¡æL) |
Conveyor type |
Chain+ Mesh |
Conveyor speed |
300~2000mm/min |
Cooling type |
Forced air cooling |
The
actual machine should be prevail if parameters changed.
JTR
½Ã¸®Áî
Feature£º
¨ç
Longer heating area makes higher production efficiency and throughput.
¨è
15% improvement of heat transfer efficient resolved more complicated and
larger PCB lead-free technology.
¨é
Strengthened main sweep keep rail no transverse deformation, no board
stuck and dropped.
¨ê
Chamber designed for fully protecting and closing to keep no leaving of
N2, the lowest content of O2 can be 150ppm.
¨ë
Low consumption of N2, 20-22 m©ø/H of N2 reflow in O2 content is
300-800PPM condition.
Parameters£º
MODEL |
JTR-600/JTR-600-N |
JTR-800/JTR-800-N |
JTR-1000/JTR-1000-N |
JTR-1200/JTR-1200-N |
Outside Dimension£¨L*W*H£© |
4190 x1430 x1530 |
5520 x1430 x1530 |
6300 x 1430 x 1530 |
7050 x 1430 x 1530 |
Weight |
1850KG |
2400KG / 2500KG |
2700KG / 2800KG |
3000KG / 3100KG |
Number Of Heating Zones |
Up /Bottom 6 |
Up /Bottom 8 |
Up /Bottom 10 |
Up /Bottom 12 |
Length Of Heating Zones |
2295mm |
3110mm |
3890mm |
4640mm |
Number Of Cooling Zones |
1(Cool Air Conversion) |
Up 3 / Bottom 3 (Cool Air Conversion) |
Exhaust Volume |
10 M3 / min x 2 ( Exhausts) |
Electric Supply Required |
3 phase, 380V 50/60Hz (Optional: 3 phase, 220V 50/60Hz ) |
Electric Power Required |
48KW / 51KW |
64KW / 67KW |
80KW / 83KW |
93KW / 97KW |
Power For Warm Up |
24KW / 26KW |
30KW / 32KW |
36KW / 38KW |
40KW / 42KW |
Power Consumption |
6.5KW / 7KW |
9KW / 10KW |
10KW / 11KW |
11KW / 12KW |
Warming Time |
Approx. 20 minu |
Approx.25 minu |
MODEL |
JTR-800D/JTR-800D-N |
JTR-1000/JTR-1000-N |
JTR-1200/JTR-1200-N |
Outside Dimension(L*W*H) |
5520 x 1660 x 1530 |
6300 x 1660 x 1530 |
7050 x 1660 x 1530 |
Weight |
2750KG / 2850KG |
3050KG / 3150KG |
3350KG / 3450KG |
Number Of Heating Zones |
Up / Bottom 8 |
Up / Bottom 10 |
Up / Bottom 12 |
Length Of Heating Zones |
3110mm |
3890mm |
4640mm |
Number Of Cooling Zones |
Up 3 / Bottom 3 (Cool Air Conversion ) |
Exhaust Volume |
10 M3 / min x 2 (Exhausts) |
Electric Supply Required |
3phase, 380V 50/60Hz (Optional: 3 phase, 220V 50/60Hz ) |
Electric Power Required |
64KW / 67KW |
80KW / 83KW |
101KW / 105KW |
Power For Warm Up |
32KW / 34KW |
38KW / 40KW |
42KW / 44KW |
Power Consumption |
10KW / 11KW |
11KW / 12KW |
12KW / 13KW |
Warming Time |
Approx. 30 min |
¡¡ |
¡¡ |
¡¡ |
¡¡ |
¡¡ |
¡¡ |
¡¡ |
The
actual machine should be prevail if parameters changed.
KT
½Ã¸®Áî
KT
Series
¡¡
Features£º
¨ç
High speed, high efficiency, conveyor speed can run 160cm/min. in normal
soldering process.
¨è
Prevent deformation design as well as two-phase rail composition.
¨é
New two level flux reclaim system with multi-zones collecting.
¨ê
Whole tunnel nitrogen protection and oxygen concentration monitoring, the
02 ppm can be checked automatically or manually.
¨ë
New enhanced 4 cooling zones which are able to cool down the PCBA to 50¡É
even in large volume lead free process.
Parameters£º
Model |
KTD-0804/KTD-0804-N |
KTD-1004/KTD-1004-N |
KTD-1204/KTD-1204-N |
GENERAL |
|
Outside Dimension |
5900X1725X1630mm |
6622X1725X1630mm |
7313X1725X1630mm |
Standard Color |
Computer Grey |
Computer Grey |
Computer Grey |
Weight |
Approx.3150KG/3300KG |
Approx.3650KG/3800KG |
Approx.4150KG/4300KG |
Electric Supply Required |
3 Phase,380V 50/60HZ(Optional:3 Phase,220V 50/60HZ) |
Electric Power |
71KW/74KW |
89KW/92KW |
101KW/105KW |
Power For Warm Up |
33KW/35KW |
35KW/37KW |
40KW/42KW |
Power Consumption |
9KW/9.5KW |
10KW/11KW |
11.5KW/13KW |
Components Clearance |
PCB Top:30mm Bottom:25mm |
Model |
KTS-0804/KTS-0804-N |
KTS-1004/KTS-1004-N |
KTS-1204/KTS-1204-N |
GENERAL |
|
Outside Dimension |
5900X1495X1630mm |
6622X1495X1630mm |
7313X1495X1630mm |
Standard Color |
Computer Grey |
Computer Grey |
Computer Grey |
Weight |
Approx.2800KG/2950KG |
Approx.3250KG/3400KG |
Approx.3700KG/3850KG |
Electric Supply Required |
3 Phase,380V 50/60HZ(Optional:3 Phase,220V 50/60HZ)
|
Electrical Power |
65KW/69KW |
81KW/85KW |
93KW/97KW |
Power For Warm Up |
30KW/32KW |
32KW/34KW |
37KW/39KW |
Power Consumption |
7.5KW/8.5KW |
8.5KW/9.5KW |
10.5KW/11.5KW |
Components Clearance |
PCB Top:30mm Bottom:25mm |
Model |
KTS-0804L/KTS-0804L-N |
KTS-1004L/KTS-1004L-N |
KTS-1204L/KTS-1204L-N |
GENERAL |
|
Outside Dimension |
5900X1725X1630mm |
6622X1725X1630mm |
7313X1725X1630mm |
Standard Color |
Computer Grey |
Computer Grey |
Computer Grey |
Weight |
Approx.3100KG/3250KG |
Approx.3600KG/3750KG |
Approx.4100KG/4250KG |
Electric Supply Required |
3 Phase,380V Phase,220V 50/60H (Optional:3 50/60HZ) |
Electric Power |
71KW/74KW |
89KW/92KW |
101KW/105KW |
Power For Warm Up |
32KW/34KW |
34KW/36KW |
39KW/41KW |
Power Consumption |
8KW/9KW |
9.5KW/10KW |
11KW/12KW |
Components Clearance |
PCB Top:30mm Bottom:25mm |
The
actual machine should be prevail if parameters changed.
RS
½Ã¸®Áî
RS
Series
¡¡
Features£º
¨ç
Independent Air Velocity Controlling by section can achieve flexible
processing adjustment, therefore dealing with various & complicated Lead Free
Processing easily.
¨è
New Cooling Configuration to make the filtered or reclaimed air back to
oven chamber, it reduced the thermal loss as well as get better flux
reclamation.
¨é
New Air Management System with significant energy save, lower electric
power consumption & lower carbon.
¨ê
The chambers with multi-layers and thicker thermal insulation to get
lower temp of oven surface
Parameters:
Model |
RS-800/RS-800-N |
RS-1000/RS-1000-N |
Dimension(L*W*H£© |
5378X1320X1490 |
6605x1320x1490 |
No. of Heating Zone |
Top /Bottom 8 |
Top /Bottom 10 |
Length of heating zone |
3110mm |
3892mm |
No. of cooling zone |
Top2 |
Air exhaust requirement |
10M3/minx2 |
Warming time |
About.30 minutes |
About.35 minutes |
Temperature control accuracy |
¡¾1.0¡É |
Temperature deviation on PCB |
¡¾1.5¡É(by
JT Board Test Standard) |
PCB Max. width |
400mm (Option:610mm) |
Rail width range |
50~400mm£¨Option0~400mm£© |
Component Height |
PCB Top/Bottom25mm |
Conveyor direction |
L¡æR (Option:R¡æL) |
Conveyor speed |
300~2000mm/min |
Cooling type |
Air: enhanced air cooling; N2 reflow oven reflow oven: Cooling
machine¡¯;lh9l-0 |
¡¡ |
¡¡ |
|
¡¡ |
The
actual machine should be prevail if parameters changed.
|