PR1 BGA Solder Ball Checker
-
The solder ball of mounted BGA is checking easily by pocket type
checker.
-
The checker has strap, thus, always near by you.
-
PR1 have a LED light with a battery.
-
It is also made check for lead of a QFP and Tip Parts etc.
-
It is very easy use.
Outline of Operation
PR1 is a pocket type handy checker for solder
ball of BGA. It can check the image which is the prism of the
top and was changed 90 degrees. And the image is expanded with
the lens, it is about x7 magnifications. It is an attached strap
and it is always together with you.
The materials of the body are conductive for an anti-static
electricity.
PR1 can also be check the lead of QFP and the
tip parts, it will be the good friend who helps you.
|
PR1
Parts Set
PR1
Consist of...
Sample Image |
Lighting
PR1 has a lighting system, it is by white-LED. It is
illuminate to the target, thus, you can check of the image with
cleared. The LED operate by the battery.
The sensor prism
The sensor prism is by special glass, and the tip of the prism is
thin, it should be operation with carefully.
The sensor prism and the battery are exchangeable.
LED Lighting
|
Check Image
|
Specifications
| Item |
Specification |
| Image magnification |
about x7 |
| Real View |
10mm |
| Prism |
8mm wide by special-glass |
| LED Lighting |
LED by CR2016 battery |
| Weight |
approx. 25g |
| Size |
50H x 30W x 15t mm |
| Accessory |
Strap |
| Spare Parts |
RP-1S Sensor Prism / CR2016
Battery |
The specification are subject to change without notice.
